for complex geometries
on milled features
available on prototypes
for cosmetic parts
CNC Machined Heatsinks & Thermal Components for Electronics
Electronics teams in Ann Arbor need thermal management components that maximize heat dissipation, fit precisely, and integrate cleanly. We machine aluminum and copper pin fin heatsinks, liquid cold plates, and heat spreaders with flat thermal interface surfaces to ±0.001".
Thermal Materials
Aluminum 6063, copper C110, and composites for maximum thermal conductivity.
Interface Flatness
±0.001" flatness on thermal interface surfaces for optimal TIM contact.
Channel Precision
Complex serpentine and micro-channel cold plate geometries for high heat flux.
University of Michigan's Engineering Powerhouse Drives Ann Arbor Consumer Electronics
Ann Arbor's consumer electronics ecosystem is anchored by the University of Michigan — U-M's engineering programs spin out consumer hardware startups building wearable health devices, connected fitness electronics, and IoT sensors. Duo Security (Cisco) in Ann Arbor develops consumer-facing security hardware, while May Mobility builds autonomous vehicle consumer interfaces. Toyota's Research Institute in Ann Arbor develops next-generation consumer driving technology, and Spark innovation center in downtown Ann Arbor supports consumer device companies from prototype to production. The city's concentration of engineering PhDs feeds premium consumer electronics R&D.
RivCut serves Ann Arbor consumer electronics teams with CNC-machined wearable housings, sensor enclosures, and device prototypes — with the research-grade precision and cosmetic finishes your U-M-spinout consumer products demand.
Duo Security (Cisco)
Consumer-facing security hardware
May Mobility
Autonomous vehicle consumer interfaces
Toyota Research Institute (Ann Arbor)
Next-gen consumer driving technology
What Ann Arbor Consumer Electronics Teams Usually Order
| Typical quantity | 5–20 prototypes · 20–100 pre-production units |
|---|---|
| Common materials | Aluminum 7075-T6 |
| Key requirement | Cosmetic surface finish (anodize, bead-blast), tight tolerances on mating features |
| Typical lead time | 5–10 business days for prototypes, 10–15 for production |
| Who orders | Product designers, ME leads, and NPI engineers at consumer electronics companies |
Heatsinks for Ann Arbor Teams
Pin fin heatsinks, liquid cold plates, heat spreaders, and fan shrouds machined for thermal performance.
Pin Fin Heatsinks
Aluminum and copper pin fin heatsinks with dense fin arrays, flat TIM contact surfaces, and mounting hole patterns.
Al 6063 & CuLiquid Cold Plates
Aluminum cold plates with gun-drilled or brazed serpentine flow channels, inlet/outlet ports, and flat mounting surfaces.
Serpentine flowHeat Spreaders
Copper C110 heat spreader plates with precision-lapped thermal interface surfaces and component-matched footprints.
Lapped surfaceFan Shrouds
Aluminum fan shroud and duct assemblies with precise fan ring bores and airflow directing vane features.
Airflow ductVapor Chamber Bases
Copper vapor chamber base plates with precise wick structure mounting features and hermetic seal grooves.
Vapor chamberTEC Mount Plates
Aluminum and copper thermoelectric cooler mounting plates with precise module pocket and wire routing features.
TEC mounting20 Housings. 7 Days. Cosmetic-Grade Finish.
A Ann Arbor-area consumer electronics company needed heatsink housings with integrated fin arrays, precise PCB mounting features, and a cosmetic anodized finish for a premium audio amplifier. Teams near companies like Duo Security (Cisco) trust this kind of precision and documentation rigor.
Every part shipped with full documentation:
- CMM dimensional report — mounting features and fin geometry verified
- Material cert with heat lot and ASTM B221 compliance
- Surface finish verification on cosmetic faces
- Anodize process cert with color match verification
What Ann Arbor Consumer Electronics Buyers Should Know
Request research-grade precision on consumer wearable and sensor device prototypes
U-M engineering spinouts expect ±0.001" tolerances and flawless cosmetic finishes on early-stage hardware.
Specify autonomous-vehicle-grade sensor housing machining for May Mobility and Toyota Research-class consumer products
lidar, camera, and radar mounts need tight positional accuracy.
Ask about rapid prototyping with 3-5 day turnarounds for Spark innovation center deadlines
Ann Arbor consumer hardware startups need fast iterations to maintain their competitive development pace.
When Your Local Shop Can't Keep Up
When demand surges at local shops, your orders wait. We give you fixed lead times, instant quoting, and full documentation — every time. Ann Arbor's consumer electronics sector demands it.
Documentation-Ready
Dimensional reports, material certs, and process records ship with every order — no chasing paperwork after delivery.
Full Material Traceability
Every bar ships with mill certs and heat lot numbers. Full chain of custody from raw stock to finished part.
CMM Inspection, Every Part
NIST-traceable CMM verification on every critical dimension before anything ships. No sampling — we inspect every part.
5–7 Day Prototype Turnaround
Most first articles ship in under a week. Rush available for simpler geometries. Confirmed ship date at order.
Need our full quality documentation? Email us — we'll send everything your team needs.
From File to Part in 3 Steps
Simple, clear, and designed for fast-moving teams.
Upload & Quote
Upload your STEP or IGES file, select material and finish, and get an instant AI price. Every quote includes a free DFM review.
We Machine & Inspect
Parts run on our CNC mills and lathes with CMM inspection on every order. We verify every critical dimension before shipping.
Ship with Full Docs
Your order ships with dimensional reports, material certs, and full paperwork — everything your quality team needs.
Questions from Ann Arbor Consumer Electronics Teams
Consumer Electronics CNC Machining in Other Cities
We serve consumer-electronics teams in cities across the US.
Upload Your CAD File
Heatsinks & Thermal Management, structural brackets, housings, and more — we machine them all. Most orders ship in 5 to 7 business days.
No minimums · 100% Made in USA · Never brokered · Ships anywhere in the US
Currently accepting new projects