for complex geometries
on milled features
available on prototypes
technical data
CNC Machined Armored Vehicle Components for Defense Teams
Defense vehicle teams in Ann Arbor need components that are strong, precise, and built to mil-spec. We machine AHSS, aluminum, and titanium armored vehicle parts with tight tolerances. Full documentation on every order.
High-Strength Alloys
AHSS, 7075 aluminum, and titanium with mil-cert traceability.
Structural Tolerances
±0.001" on general hull attachment and fitting features.
Defense Docs
Inspection reports and material certs for your vehicle program.
Research University Meets Defense Innovation
Ann Arbor's defense footprint centers on the University of Michigan's defense research labs — autonomous vehicle programs for DARPA, radar and sensor R&D, and materials science for armor and propulsion. KLA and smaller defense-tech companies tap UM talent for classified programs.
RivCut gives Ann Arbor defense researchers and contractors pursuing ITAR registration machining with rapid prototype turns for DARPA and Army research timelines.
University of Michigan — Defense Research
DARPA autonomous vehicle, radar, and advanced materials programs requiring rapid prototype machining.
UM Applied Physics Lab
Classified sensor and electronics R&D driving precision-machined test article and prototype demand.
TARDEC Legacy — Detroit Arsenal Connection
Ground vehicle research and development flowing from Ann Arbor researchers to Sterling Heights production.
Ann Arbor Defense-Tech Startups
University spinouts building autonomous systems, sensors, and AI platforms for DoD programs.
What Ann Arbor Defense Teams Usually Order
| Typical quantity | 5–20 first articles · 20–100 low-rate production |
|---|---|
| Common materials | Aluminum 7075-T6 |
| Key requirement | ITAR compliance, MIL-spec documentation, full material traceability |
| Typical lead time | 7–15 business days based on material and security requirements |
| Who orders | Program engineers and procurement at defense contractors |
Armored Vehicle Parts for Ann Arbor Teams
Armor brackets, hull fittings, hatch hardware, and viewport frames machined to mil-spec.
Armor Plate Brackets
AHSS and steel armor mounting brackets with precise through-hole patterns and flatness requirements.
High-strength steelHull Fittings
Aluminum and steel hull penetration fittings, grommet plates, and weld prep components.
Hull integrityHatch Hardware
Steel and aluminum hatch hinges, latches, and locking mechanisms for armored access panels.
Locking featuresViewport Frames
Aluminum and steel ballistic glass viewport frames with precise glass seat and mounting hole patterns.
Ballistic interfaceCrew Compartment Parts
Aluminum seat tracks, equipment mounts, and bracket systems for armored vehicle interiors.
Interior mountsSuspension & Drive Mounts
Steel drive train mounting brackets and suspension interface plates for armored mobility systems.
Drive mounts10 Housings. 10 Days. Pursuing ITAR Registration.
A Ann Arbor-area defense contractor needed mil-spec housings machined under ITAR controls — tight bore tolerances, MIL-A-8625 anodize, and full dimensional verification. Teams near companies like University of Michigan — Defense Research trust this kind of precision and documentation rigor.
Every unit shipped with controlled documentation:
- CMM dimensional report — all MIL-spec callouts verified
- Material cert with heat lot traceability
- First Article Inspection per AS9102
- MIL-A-8625 Type III anodize process cert
What Ann Arbor Defense Buyers Should Know
DARPA autonomous vehicle prototypes iterate weekly
University of Michigan defense research programs go through rapid design changes. Your machining partner needs 3-5 day prototype turnaround.
Classified programs at UM require facility-cleared suppliers
Some University of Michigan defense research labs handle classified data. Verify your supplier's security clearance level before engaging.
DFARS material compliance applies even for university research
DoD-funded research prototypes must use DFARS-compliant material when specified. Verify material sourcing before machining.
When Your Local Shop Can't Keep Up
When a prime contract surges volume, smaller buyers get pushed back. We give you fixed lead times, ITAR compliance, and mil-spec documentation — every time. Ann Arbor's defense sector demands it.
Documentation-Ready
Dimensional reports, material certs, and process records ship with every order — no chasing paperwork after delivery.
Full Material Traceability
Every bar ships with mill certs and heat lot numbers. Full chain of custody from raw stock to finished part.
CMM Inspection, Every Part
NIST-traceable CMM verification on every critical dimension before anything ships. No sampling — we inspect every part.
5–7 Day Prototype Turnaround
Most first articles ship in under a week. Rush available for simpler geometries. Confirmed ship date at order.
Need our full quality documentation? Email us — we'll send everything your team needs.
From File to Part in 3 Steps
Simple, clear, and designed for fast-moving teams.
Upload & Quote
Upload your STEP or IGES file, select material and finish, and get an instant AI price. Every quote includes a free DFM review.
We Machine & Inspect
Parts run on our CNC mills and lathes with CMM inspection on every order. We verify every critical dimension before shipping.
Ship with Full Docs
Your order ships with dimensional reports, material certs, and full paperwork — everything your quality team needs.
Questions from Ann Arbor Defense Teams
Defense CNC Machining in Other Cities
We serve defense teams in cities across the US.
Upload Your CAD File
Armored Vehicle Components, structural brackets, housings, and more — we machine them all. Most orders ship in 5 to 7 business days.
No minimums · 100% Made in USA · Never brokered · Ships anywhere in the US
Currently accepting new projects