for complex geometries
on milled features
available on prototypes
production runs
CNC Machined Sensor & Encoder Mounts for Robotics Teams
Robotics teams in Ann Arbor need sensor mounts with precise alignment surfaces and repeatable reference geometry. We machine aluminum and stainless encoder brackets, LiDAR mounts, and camera brackets to ±0.0005" on critical features. CMM inspection on every order.
Sensor Mount Materials
Aluminum 6061/7075 and 304 stainless for sensor and encoder hardware.
Alignment Precision
±0.0005" on sensor reference and alignment surfaces.
Robotics QC Docs
CMM inspection reports on every sensor mount order.
University of Michigan and Cobot Pioneers Power Ann Arbor's Robotics Cluster
Ann Arbor is a genuine robotics hub — Universal Robots' U.S. headquarters is here, the University of Michigan's Robotics Institute is a top-tier research center, and Fanuc America's Rochester Hills campus is just 40 minutes away. May Mobility develops autonomous shuttle vehicles in Ann Arbor, and the Mcity autonomous vehicle test facility provides a controlled urban proving ground. Ford's autonomous vehicle division and Toyota Research Institute also maintain Ann Arbor engineering offices.
RivCut supports Ann Arbor robotics teams with rapid-turn CNC machining for cobot end-effectors, autonomous vehicle sensor mounts, and research robot chassis — with the fast iterations your university spinouts and AV programs demand.
Universal Robots (U.S. HQ)
Collaborative robot arms for manufacturing
May Mobility
Autonomous shuttle vehicles
University of Michigan Robotics
Top-tier robotics research institute
Mcity (U-M)
Autonomous vehicle test facility
What Ann Arbor Robotics & Automation Teams Usually Order
| Typical quantity | 1–5 prototypes · 10–50 low-rate production |
|---|---|
| Common materials | Aluminum 7075-T6 |
| Key requirement | Dimensional accuracy on assembly interfaces, multi-material capability |
| Typical lead time | 5–7 business days for prototypes, 10–15 for production |
| Who orders | Mechanical engineers and hardware leads at robotics companies |
Sensor Mounts for Ann Arbor Teams
Encoder brackets, LiDAR mounts, camera brackets, force sensor flanges, and proximity bodies machined to print.
Encoder Brackets
Aluminum rotary and linear encoder mounting brackets with precise read-head and target ring alignment features.
Sub-0.001" alignLiDAR Mounts
Aluminum and stainless LiDAR sensor mounting rings and brackets with precise tilt and pan reference surfaces.
Precise tilt/panCamera Brackets
Aluminum 2D and 3D camera mounting plates with precise optical center and mounting hole features.
Optical centerForce Sensor Flanges
Aluminum and stainless 6-DOF force/torque sensor mount flanges with precise ISO flange compatibility.
6-DOF sensingProximity Sensor Bodies
Aluminum and stainless inductive and capacitive proximity sensor housing bodies for integration in robot cells.
Sensor integrationVision System Mounts
Aluminum structured light and stereo vision camera system mounting brackets and calibration target fixtures.
Vision calibration5 Housings. 5 Days. Precise Bore Fits.
A Ann Arbor-area robotics startup needed actuator housings with precise bearing bores, cable routing channels, and sensor mount features. Teams near companies like Universal Robots (U.S. HQ) trust this kind of precision and documentation rigor.
Every part shipped with full documentation:
- CMM dimensional report — bearing bores and mount features verified
- Material cert with heat lot traceability
- Surface finish verification per drawing callout
- Assembly notes and fit verification
What Ann Arbor Robotics & Automation Buyers Should Know
Universal Robots cobot end-effectors need precision-machined ISO 9409-1 flanges
confirm your shop can hold the bolt-circle and register tolerances.
Ask about rapid prototype turnaround (3-5 days)
Ann Arbor robotics startups and U-M labs iterate weekly on funded research projects.
Request lightweight 7075-T6 aluminum for autonomous vehicle sensor mounts
AV development demands the best strength-to-weight for roof-mounted arrays.
When Your Local Shop Can't Keep Up
When a hardware demo deadline hits, production-focused shops won't rush your 5-piece order. We give you no-minimum orders, instant quoting, and 5-day turnaround — every time. Ann Arbor's robotics & automation sector demands it.
Documentation-Ready
Dimensional reports, material certs, and process records ship with every order — no chasing paperwork after delivery.
Full Material Traceability
Every bar ships with mill certs and heat lot numbers. Full chain of custody from raw stock to finished part.
CMM Inspection, Every Part
NIST-traceable CMM verification on every critical dimension before anything ships. No sampling — we inspect every part.
5–7 Day Prototype Turnaround
Most first articles ship in under a week. Rush available for simpler geometries. Confirmed ship date at order.
Need our full quality documentation? Email us — we'll send everything your team needs.
From File to Part in 3 Steps
Simple, clear, and designed for fast-moving teams.
Upload & Quote
Upload your STEP or IGES file, select material and finish, and get an instant AI price. Every quote includes a free DFM review.
We Machine & Inspect
Parts run on our CNC mills and lathes with CMM inspection on every order. We verify every critical dimension before shipping.
Ship with Full Docs
Your order ships with dimensional reports, material certs, and full paperwork — everything your quality team needs.
Questions from Ann Arbor Robotics & Automation Teams
Robotics & Automation CNC Machining in Other Cities
We serve robotics teams in cities across the US.
Upload Your CAD File
Sensor & Encoder Mounts, structural brackets, housings, and more — we machine them all. Most orders ship in 5 to 7 business days.
No minimums · 100% Made in USA · Never brokered · Ships anywhere in the US
Currently accepting new projects