for complex geometries
on milled features
available on prototypes
Boston projects
Aerospace Structural Bracket Machining for Flight Teams
Aerospace structural teams in Boston need brackets and fittings that are strong, light, and traceable. We machine aluminum 7075, titanium 6Al-4V, and 4340 steel to ±0.001". CMM inspection and AS9100D-aligned docs on every order.
Flight-Critical Materials
Al 7075-T6, titanium 6Al-4V, and 4340 steel with mill certs.
Structural Tolerances
±0.001" on holes and mating surfaces. CMM verified.
AS9100D Docs
Inspection reports and material certs for program documentation.
Where Aerospace Innovation Meets Heritage Engine Manufacturing
Boston's aerospace cluster stretches from GE Aerospace's (formerly GE Aviation) jet engine facility in Lynn to Raytheon's (RTX) advanced sensors division in Andover, with Pratt & Whitney's Connecticut operations just hours south. MIT's AeroAstro department and Draper Laboratory drive next-generation propulsion, autonomy, and satellite research that feeds regional machining demand.
RivCut gives Boston-area aerospace teams instant quoting and AS9100-quality machining with full traceability — engine components, sensor housings, and structural parts on fixed lead times.
GE Aerospace (Lynn)
Jet engine manufacturing, testing, and overhaul facility
Raytheon (RTX)
Advanced sensors, radar, and electronic warfare systems in Andover/Tewksbury
Draper Laboratory
Autonomous systems, inertial navigation, and space guidance R&D
What Boston Aerospace Teams Usually Order
| Typical quantity | 5–25 parts for validation builds or first articles; 25–100 parts for low-rate production runs |
|---|---|
| Common materials | Titanium Ti-6Al-4V, Aluminum 7075-T6, 17-4 PH Stainless Steel |
| Key requirement | AS9100D-backed full cert package including material traceability, FAI report, and ITAR compliance confirmation |
| Typical lead time | 7–15 business days depending on material and feature complexity |
| Who orders | Mechanical engineer or supply chain manager at a defense prime or aerospace startup, often managing multiple vendors across a fast-moving program |
Aerospace Structural Parts for Boston Teams
Wing ribs, bulkheads, gussets, and fittings machined with full AS9100D-aligned documentation.
Wing Ribs & Spars
Aluminum 7075 wing ribs and spars. Complex lightening pockets, precise hole patterns, and anodize-ready surfaces.
Al 7075-T6Bulkheads & Frames
Aluminum and titanium structural frames and bulkheads. Tight flatness, precise cutouts, and critical fastener holes.
±0.001" holesGussets & Shear Clips
Aluminum gussets, shear clips, and splice plates. High-strength with tight edge distance tolerances.
Al 2024 & 7075Structural Fittings
Titanium and steel clevis fittings, rod end attachments, and hinge brackets. Critical bore and pin tolerances.
Ti & 4340 steelStandoffs & Spacers
Aluminum and titanium structural standoffs, bushings, and inserts. Precise thread forms and length tolerances.
Aluminum & TiGround Support Equipment
Aluminum and steel GSE jigs, fixtures, and tooling for aerospace assembly. Precise locating features.
GSE tooling24 Brackets. 6 Days. Full Cert Package.
A Cambridge aerospace team needed structural brackets for a commercial aircraft wing assembly — precise bolt patterns, tight flatness on mating faces, and chemical conversion coating per MIL-DTL-5541. Teams near companies like GE Aerospace (Lynn) trust this kind of precision and documentation rigor.
Every part shipped with full documentation:
- CMM dimensional report — all GD&T callouts verified
- Material cert with heat lot and ASTM B209 compliance
- First Article Inspection per AS9102
- Chemical conversion coating process cert
What Boston Aerospace Buyers Should Know
Verify Nadcap heat treat and NDT accreditations
GE Aerospace Lynn and Raytheon Andover both require Nadcap callouts on purchase orders.
Ask about classified facility clearance if your program involves Hanscom AFB or Lincoln Laboratory work
many Boston-area contracts require facility clearance.
Confirm your supplier can machine Inconel 718 and Waspaloy
GE Lynn engine programs spec nickel superalloys extensively.
When Your Local Shop Can't Keep Up
When a prime surges volume, local shops push you back in the queue. We give you fixed lead times, instant quoting, and aerospace-grade documentation — every time. Boston's aerospace sector demands it.
Documentation-Ready
Dimensional reports, material certs, and process records ship with every order — no chasing paperwork after delivery.
Full Material Traceability
Every bar ships with mill certs and heat lot numbers. Full chain of custody from raw stock to finished part.
CMM Inspection, Every Part
NIST-traceable CMM verification on every critical dimension before anything ships. No sampling — we inspect every part.
5–7 Day Prototype Turnaround
Most first articles ship in under a week. Rush available for simpler geometries. Confirmed ship date at order.
Need our full quality documentation? Email us — we'll send everything your team needs.
From File to Part in 3 Steps
Simple, clear, and designed for fast-moving teams.
Upload & Quote
Upload your STEP or IGES file, select material and finish, and get an instant AI price. Every quote includes a free DFM review.
We Machine & Inspect
Parts run on our CNC mills and lathes with CMM inspection on every order. We verify every critical dimension before shipping.
Ship with Full Docs
Your order ships with dimensional reports, material certs, and full paperwork — everything your quality team needs.
Questions from Boston Aerospace Teams
Aerospace CNC Machining in Other Cities
We serve aerospace teams in cities across the US.
Upload Your CAD File
Structural Brackets, structural brackets, housings, and more — we machine them all. Most orders ship in 5 to 7 business days.
No minimums · 100% Made in USA · Never brokered · Ships anywhere in the US
Currently accepting new projects