for complex geometries
on milled features
available on prototypes
Dayton projects
CNC Machined Composite Tooling for Aerospace Teams
Aerospace composite teams in Dayton need tooling that is accurate, stable, and ready for autoclave. We machine aluminum and Invar layup molds, cure tools, and caul plates to tight surface tolerances. AS9100D-aligned documentation available.
Tooling Materials
Aluminum, Invar, and HDB with full material traceability.
Surface Accuracy
Ra 32 µin or better on mold faces. CMM inspection available.
Tooling Docs
Dimensional reports and material certs for tooling qualification.
Birthplace of Aviation, Home of Wright-Patterson
Dayton is where powered flight began — and Wright-Patterson Air Force Base remains the epicenter of Air Force research, development, and logistics. The Air Force Research Laboratory (AFRL), Air Force Life Cycle Management Center (AFLCMC), and National Air and Space Intelligence Center (NASIC) drive advanced materials, propulsion, and systems machining demand. GE Aerospace's supply chain extends deep into the Dayton metro.
RivCut gives Dayton aerospace teams AS9100-grade machining with instant quoting and fixed lead times — R&D prototypes, production components, and sustainment parts that meet AFRL and AFLCMC requirements.
Wright-Patterson AFB / AFRL
Air Force Research Laboratory — materials, propulsion, and sensors R&D
AFLCMC
Air Force Life Cycle Management Center — acquisition and sustainment
GE Aerospace (regional)
Engine component suppliers feeding Cincinnati programs
Systima Technologies
Aerospace thermal management and structural composites
What Dayton Aerospace Teams Usually Order
| Typical quantity | 5–25 first articles · 25–100 low-rate production |
|---|---|
| Common materials | Aluminum 7075-T6 |
| Key requirement | Full cert package: material traceability, FAI report, ITAR compliance |
| Typical lead time | 7–15 business days based on material and complexity |
| Who orders | Engineers and procurement managers at defense primes and aerospace startups |
Composite Tooling for Dayton Teams
Layup molds, cure tools, caul plates, and trim fixtures machined to print.
Layup Molds
Aluminum and Invar layup mold tools. Precise OML/IML surfaces, vacuum port locations, and edge dams.
Al & InvarCure Tools
Invar and aluminum autoclave cure tools with precise surface match and thermal expansion control.
Invar 36Caul Plates
Aluminum and steel caul plates for pressure application on composite laminates. Flat and contoured surfaces.
Flatness to 0.005"Trim Fixtures
Aluminum trim jigs and router templates for composite part trimming. Precise edge and hole locations.
Router guidesDrill Templates
Aluminum and carbon-reinforced drill templates for composite assembly. Bushed holes for tight location.
Drill bushingsInspection Fixtures
Aluminum CMM inspection fixtures for composite part verification. Precise datum features.
CMM fixtures2 Tools. 12 Days. Cure-Stable Surfaces.
A Miami Valley composites team needed Invar layup tools with precise contour surfaces, vacuum port locations, and thermal stability for autoclave cure cycles. Teams near companies like Wright-Patterson AFB / AFRL trust this kind of precision and documentation rigor.
Every tool shipped with complete documentation:
- CMM dimensional report — contour and datum features verified
- Material cert with heat lot and ASTM A658 compliance
- Surface finish verification on tool surface
- Dimensional stability verification post stress-relief
What Dayton Aerospace Buyers Should Know
Ensure your supplier understands AFRL research prototype requirements
Wright-Patterson programs often need one-off parts with full dimensional inspection reports and exotic materials.
Ask about government source inspection (GSI) experience
AFLCMC contracts frequently require DCMA inspection at the point of manufacture.
Verify your shop's ITAR registration and facility clearance
virtually all Wright-Patterson aerospace programs carry classification or export control requirements.
When Your Local Shop Can't Keep Up
When a prime surges volume, local shops push you back in the queue. We give you fixed lead times, instant quoting, and aerospace-grade documentation — every time. Dayton's aerospace sector demands it.
Documentation-Ready
Dimensional reports, material certs, and process records ship with every order — no chasing paperwork after delivery.
Full Material Traceability
Every bar ships with mill certs and heat lot numbers. Full chain of custody from raw stock to finished part.
CMM Inspection, Every Part
NIST-traceable CMM verification on every critical dimension before anything ships. No sampling — we inspect every part.
5–7 Day Prototype Turnaround
Most first articles ship in under a week. Rush available for simpler geometries. Confirmed ship date at order.
Need our full quality documentation? Email us — we'll send everything your team needs.
From File to Part in 3 Steps
Simple, clear, and designed for fast-moving teams.
Upload & Quote
Upload your STEP or IGES file, select material and finish, and get an instant AI price. Every quote includes a free DFM review.
We Machine & Inspect
Parts run on our CNC mills and lathes with CMM inspection on every order. We verify every critical dimension before shipping.
Ship with Full Docs
Your order ships with dimensional reports, material certs, and full paperwork — everything your quality team needs.
Questions from Dayton Aerospace Teams
Aerospace CNC Machining in Other Cities
We serve aerospace teams in cities across the US.
Upload Your CAD File
Composite Tooling, structural brackets, housings, and more — we machine them all. Most orders ship in 5 to 7 business days.
No minimums · 100% Made in USA · Never brokered · Ships anywhere in the US
Currently accepting new projects