for complex geometries
on milled features
available on prototypes
New Haven projects
Aerospace Structural Bracket Machining for Flight Teams
Aerospace structural teams in New Haven need brackets and fittings that are strong, light, and traceable. We machine aluminum 7075, titanium 6Al-4V, and 4340 steel to ±0.001". CMM inspection and AS9100D-aligned docs on every order.
Flight-Critical Materials
Al 7075-T6, titanium 6Al-4V, and 4340 steel with mill certs.
Structural Tolerances
±0.001" on holes and mating surfaces. CMM verified.
AS9100D Docs
Inspection reports and material certs for program documentation.
Connecticut's Southern Aerospace Manufacturing Corridor
New Haven's aerospace footprint connects to Connecticut's massive jet engine and avionics corridor — Pratt & Whitney and Collins Aerospace operations in the Hartford area drive Tier 2 supply chain demand south into the New Haven metro. Sikorsky Aircraft (Lockheed Martin) in nearby Stratford builds Black Hawk and CH-53K King Stallion helicopters, and the region's precision machining shops produce turbine blades, rotor components, and avionics housings for the state's aerospace giants.
RivCut gives New Haven aerospace teams AS9100-quality machining with instant quoting and fixed lead times — helicopter components, engine parts, and avionics housings from Connecticut's manufacturing corridor.
Sikorsky Aircraft (Stratford)
UH-60 Black Hawk and CH-53K King Stallion helicopter production
Pratt & Whitney (CT corridor)
Jet engine supply chain demand flowing into southern Connecticut
Collins Aerospace (CT corridor)
Avionics and power systems component supply network
What New Haven Aerospace Teams Usually Order
| Typical quantity | 5–25 first articles · 25–100 low-rate production |
|---|---|
| Common materials | Aluminum 7075-T6 |
| Key requirement | Full cert package: material traceability, FAI report, ITAR compliance |
| Typical lead time | 7–15 business days based on material and complexity |
| Who orders | Engineers and procurement managers at defense primes and aerospace startups |
Aerospace Structural Parts for New Haven Teams
Wing ribs, bulkheads, gussets, and fittings machined with full AS9100D-aligned documentation.
Wing Ribs & Spars
Aluminum 7075 wing ribs and spars. Complex lightening pockets, precise hole patterns, and anodize-ready surfaces.
Al 7075-T6Bulkheads & Frames
Aluminum and titanium structural frames and bulkheads. Tight flatness, precise cutouts, and critical fastener holes.
±0.001" holesGussets & Shear Clips
Aluminum gussets, shear clips, and splice plates. High-strength with tight edge distance tolerances.
Al 2024 & 7075Structural Fittings
Titanium and steel clevis fittings, rod end attachments, and hinge brackets. Critical bore and pin tolerances.
Ti & 4340 steelStandoffs & Spacers
Aluminum and titanium structural standoffs, bushings, and inserts. Precise thread forms and length tolerances.
Aluminum & TiGround Support Equipment
Aluminum and steel GSE jigs, fixtures, and tooling for aerospace assembly. Precise locating features.
GSE tooling24 Brackets. 6 Days. Full Cert Package.
A Greater New Haven aerospace team needed structural brackets for a commercial aircraft wing assembly — precise bolt patterns, tight flatness on mating faces, and chemical conversion coating per MIL-DTL-5541. Teams near companies like Sikorsky Aircraft (Stratford) trust this kind of precision and documentation rigor.
Every part shipped with full documentation:
- CMM dimensional report — all GD&T callouts verified
- Material cert with heat lot and ASTM B209 compliance
- First Article Inspection per AS9102
- Chemical conversion coating process cert
What New Haven Aerospace Buyers Should Know
Ask your supplier about helicopter rotor and transmission component machining
Sikorsky programs in Stratford require hardened gears, spline fittings, and precision bores at tight tolerances.
Verify Nadcap accreditations for heat treat and NDT
Sikorsky Black Hawk and CH-53K programs require certified special processes at every sub-tier.
Confirm your shop can support both Sikorsky rotorcraft and Pratt & Whitney engine quality requirements
New Haven area suppliers frequently serve both Connecticut primes.
When Your Local Shop Can't Keep Up
When a prime surges volume, local shops push you back in the queue. We give you fixed lead times, instant quoting, and aerospace-grade documentation — every time. New Haven's aerospace sector demands it.
Documentation-Ready
Dimensional reports, material certs, and process records ship with every order — no chasing paperwork after delivery.
Full Material Traceability
Every bar ships with mill certs and heat lot numbers. Full chain of custody from raw stock to finished part.
CMM Inspection, Every Part
NIST-traceable CMM verification on every critical dimension before anything ships. No sampling — we inspect every part.
5–7 Day Prototype Turnaround
Most first articles ship in under a week. Rush available for simpler geometries. Confirmed ship date at order.
Need our full quality documentation? Email us — we'll send everything your team needs.
From File to Part in 3 Steps
Simple, clear, and designed for fast-moving teams.
Upload & Quote
Upload your STEP or IGES file, select material and finish, and get an instant AI price. Every quote includes a free DFM review.
We Machine & Inspect
Parts run on our CNC mills and lathes with CMM inspection on every order. We verify every critical dimension before shipping.
Ship with Full Docs
Your order ships with dimensional reports, material certs, and full paperwork — everything your quality team needs.
Questions from New Haven Aerospace Teams
Aerospace CNC Machining in Other Cities
We serve aerospace teams in cities across the US.
Upload Your CAD File
Structural Brackets, structural brackets, housings, and more — we machine them all. Most orders ship in 5 to 7 business days.
No minimums · 100% Made in USA · Never brokered · Ships anywhere in the US
Currently accepting new projects