after DFM review
turnaround time
to production-ready
at no charge
What Is DFM?
Design for Manufacturability explained in plain language.
Design Check
We review geometry, wall thickness, corner radii, and feature accessibility for CNC machining.
Cost Analysis
We identify features that add unnecessary cost and suggest alternatives that maintain function.
Tolerance Review
We check every tolerance. If one is tighter than needed, we suggest a relaxed value that still works.
Built for Better Designs
Our DFM reviews go beyond surface checks. We engineer cost out of your parts before machining begins.
Free Design Reviews
Every upload gets a free DFM review. No charge, no obligation. We check your design and send back specific, actionable feedback you can use immediately.
Cost Reduction Expertise
Small changes like adding corner radii, reducing pocket depth, or relaxing non-critical tolerances can cut your machining cost by 20–40%. We find those savings for you.
Engineering-First Approach
Your DFM review is done by machinists and engineers who understand CNC tooling, fixturing, and production workflows — not software-generated checklists.
Fast Turnaround
Most DFM reviews are completed within 24 hours. You get a detailed report with specific suggestions — not vague comments. Iterate fast and get to production sooner.
DFM Review Categories
Every DFM review covers these critical areas to make sure your part is optimized for CNC machining.
Wall Thickness Analysis
We check for thin walls that can flex, chatter, or break during machining. We suggest minimum wall thicknesses based on your material and part geometry.
Prevents machining failureUndercut Detection
Undercuts require special tooling or multi-setup operations. We identify undercuts early and suggest design alternatives that reduce cost and complexity.
Reduces setup countTolerance Review
Over-toleranced parts cost more to machine. We review every tolerance and suggest relaxed values on non-critical features — often saving 20–30% on cost.
Saves 20–30% avgTool Access Analysis
Deep pockets, narrow slots, and tight corners limit tool access. We flag features that require specialty tooling and suggest alternatives that use standard cutters.
Standard tooling preferredCost Optimization
We identify features that drive up machining time — deep cavities, thin ribs, unnecessary tight finishes — and suggest changes that maintain function at lower cost.
Lower per-part costMaterial Selection
We help you pick materials that machine well, meet your strength and corrosion requirements, and fit your budget. Material choice affects cost, lead time, and finish quality.
Right material, right price
DFM Redesign Saved 40% on Machining Cost — 6061-T6 Bracket
A customer uploaded a bracket with deep pockets, sharp internal corners, and over-toleranced features. Our DFM review suggested corner radii changes, pocket depth reduction, and tolerance relaxation on non-critical surfaces. Result: 40% cost reduction with zero impact on function.
after DFM review
to final approval
including revisions
output
- Corner radii optimized for standard end mills
- Non-critical tolerances relaxed from ±0.001" to ±0.005"
- Pocket depth reduced — eliminated need for long-reach tooling
- Part passed CMM inspection on first run
Free Reviews. Real Engineering. Production-Ready Parts.
Our DFM process is built to save you time and money before a single chip is cut.
Free DFM Reviews
No charge. No obligation. Every upload gets reviewed.
- Wall thickness & feature analysis
- Tolerance optimization suggestions
- Cost reduction recommendations
- Material selection guidance
Engineering Collaboration
Work directly with machinists who understand your part.
- Direct engineer-to-engineer feedback
- Fixturing & setup considerations
- Multi-axis machining guidance
- Surface finish recommendations
Production-Ready Designs
Your optimized design goes straight to the machine.
- Designs verified for machinability
- CMM inspection on every order
- Faster cycle times from optimized geometry
- Higher first-pass yield
Three Steps to a Better Design
Upload your file. We review and suggest. You approve and we machine.
Upload CAD
Send your STEP, IGES, DXF, or PDF file. Tell us your material, quantity, and any special requirements. We accept SolidWorks and STL files too.
We Review & Suggest
Our engineers check wall thickness, undercuts, tolerances, tool access, and cost drivers. You get a detailed DFM report with specific, actionable suggestions.
Approve & Machine
Make changes based on our feedback. Approve the optimized design and we machine your parts with confidence. CMM inspection included on every order.
Why Des Moines, IA Companies Choose RivCut
Des Moines (978K metro) is known for Silicon Hills tech boom. Local industries include semiconductor, EV, robotics, defense. RivCut machines parts for teams across TX from our Union City, CA facility — with standard shipping in 2–3 business days.
All parts are CNC machined in-house at our Bay Area shop. We never broker or outsource. Learn about RivCut →
DFM Questions Answered
CNC Machining Materials Available in Des Moines
Aluminum 6061 and 7075. Stainless 304, 316, and 17-4 PH. Ti-6Al-4V titanium. PEEK, Delrin, and Nylon 6/6. Every grade ships from our shop with a full mill cert.
| Aluminum | |
|---|---|
| 6061-T6 | 40 ksi yield, machinability ~190 |
| 7075-T6 | 73 ksi yield, aerospace structural |
| 2024-T3 | Fatigue resistant, airframe skins |
| 5052 | Marine-grade, formable |
| Steel | |
| 1018 | Low carbon, weldable |
| 4140 | Pre-hard 28–32 HRC, high strength |
| 4340 | Quenched & tempered, ultra-high strength |
| A36 | 36 ksi yield, structural |
| Stainless Steel | |
| 303 | Free-machining, sulfur-bearing |
| 304 | Austenitic, weldable, general purpose |
| 316 | Mo-bearing, marine and chemical grade |
| 17-4 PH | H900, ~190 ksi UTS |
| Titanium | |
| Grade 2 | CP titanium, weldable, biocompatible |
| Ti-6Al-4V (Grade 5) | 120 ksi yield, aerospace and medical |
| Brass & Copper | |
| C360 Brass | 100% machinability rating |
| C110 Copper | ~100% IACS conductivity |
| C101 Copper | Oxygen-free, ~101% IACS |
| Engineering Plastics | |
| Delrin (Acetal) | Low friction, dimensionally stable |
| PEEK | 250°C service temp, chemical resistant |
| Nylon 6/6 | Wear resistant, ~12 ksi tensile |
| UHMW | Impact resistant, low friction |
| Polycarbonate | Transparent, ~9 ksi tensile |
| PTFE (Teflon) | 260°C, chemically inert |
Don’t see your grade? Ask us — we machine 50+ alloys and polymers.
RivCut vs CNC Marketplaces vs Local Machine Shops
Why engineers in Des Moines pick RivCut over marketplaces and local machine shops. Marketplaces are fast but route your job to the lowest bidder. Local shops are trustworthy but slow on quotes and often won’t take small jobs. RivCut combines instant online quoting with the accountability of a real, in-house USA shop.
| What You Get | RivCut Best | CNC Marketplace | Local Machine Shop |
|---|---|---|---|
| Who cuts the part | Our machinists in Union City, CA | Unknown 3rd party shop | Local machinist, varies by shop |
| Country of origin | 100% USA, never outsourced | Often shipped overseas | USA, local only |
| Instant online quote | Yes — AI-priced in seconds | Yes | No — email or phone quote |
| Talk to the machinist | Yes, direct line | No, support agent only | Yes, in person |
| Free DFM review | Yes, on every order | Sometimes, paid add-on | Sometimes, informal |
| Tightest tolerance | ±0.0002 inches | ±0.005 inches typical | Varies by shop |
| Fastest lead time | 3 business days | 5–10 business days | 2–4 weeks typical |
| Minimum order | None — one part is fine | Often 5+ pieces | Often $500+ minimum |
| CMM inspection | Every order | Paid upgrade | Sometimes, manual only |
What Engineers Say About
Working With RivCut
Real reviews from real engineers. Every project matters — including yours in Des Moines.
We went through two shops before finding RivCut. Night and day difference. Parts come in right. Communication is clear. They held ±0.002" on a titanium bracket that two other shops couldn’t get right.
Aerospace PartsThey caught a tolerance issue in our drawing before production started. That saved us a full revision cycle and three weeks of delays. You don’t find that kind of attention to detail at most shops.
Medical DeviceWe needed fast turnaround on 5-axis parts for a new enclosure. RivCut delivered in 6 days. Quality was excellent. These guys move fast without cutting corners.
PrototypingThe DFM Checklist Engineers Use Before Sending CAD to a CNC Shop
14 checks for wall thickness, internal radii, tool reach, hole depth-to-diameter ratios, and tolerance stack. Catch issues before they cost you a revision cycle.
- ✓ 14-point pre-flight checklist
- ✓ Aluminum, steel & titanium-specific rules
- ✓ Printable PDF, no signup wall
DFM Design Support Near Des Moines
How Des Moines's Top Industries Use DFM Design Support
Des Moines's economy drives specific machining demand. Here's what we see from local teams.
Upload Your CAD File for a Free DFM Review
Get specific, actionable feedback on your design before machining begins. No charge. No obligation.
Free DFM review on every upload · 24-hour turnaround · STEP, IGES, DXF, PDF accepted · No minimums