after DFM review
turnaround time
to production-ready
at no charge
What Is DFM?
Design for Manufacturability explained in plain language.
Design Check
We review geometry, wall thickness, corner radii, and feature accessibility for CNC machining.
Cost Analysis
We identify features that add unnecessary cost and suggest alternatives that maintain function.
Tolerance Review
We check every tolerance. If one is tighter than needed, we suggest a relaxed value that still works.
Built for Better Designs
Our DFM reviews go beyond surface checks. We engineer cost out of your parts before machining begins.
Free Design Reviews
Every upload gets a free DFM review. No charge, no obligation. We check your design and send back specific, actionable feedback you can use immediately.
Cost Reduction Expertise
Small changes like adding corner radii, reducing pocket depth, or relaxing non-critical tolerances can cut your machining cost by 20–40%. We find those savings for you.
Engineering-First Approach
Your DFM review is done by machinists and engineers who understand CNC tooling, fixturing, and production workflows — not software-generated checklists.
Fast Turnaround
Most DFM reviews are completed within 24 hours. You get a detailed report with specific suggestions — not vague comments. Iterate fast and get to production sooner.
DFM Review Categories
Every DFM review covers these critical areas to make sure your part is optimized for CNC machining.
Wall Thickness Analysis
We check for thin walls that can flex, chatter, or break during machining. We suggest minimum wall thicknesses based on your material and part geometry.
Prevents machining failureUndercut Detection
Undercuts require special tooling or multi-setup operations. We identify undercuts early and suggest design alternatives that reduce cost and complexity.
Reduces setup countTolerance Review
Over-toleranced parts cost more to machine. We review every tolerance and suggest relaxed values on non-critical features — often saving 20–30% on cost.
Saves 20–30% avgTool Access Analysis
Deep pockets, narrow slots, and tight corners limit tool access. We flag features that require specialty tooling and suggest alternatives that use standard cutters.
Standard tooling preferredCost Optimization
We identify features that drive up machining time — deep cavities, thin ribs, unnecessary tight finishes — and suggest changes that maintain function at lower cost.
Lower per-part costMaterial Selection
We help you pick materials that machine well, meet your strength and corrosion requirements, and fit your budget. Material choice affects cost, lead time, and finish quality.
Right material, right price
DFM Redesign Saved 40% on Machining Cost — 6061-T6 Bracket
A customer uploaded a bracket with deep pockets, sharp internal corners, and over-toleranced features. Our DFM review suggested corner radii changes, pocket depth reduction, and tolerance relaxation on non-critical surfaces. Result: 40% cost reduction with zero impact on function.
after DFM review
to final approval
including revisions
output
- Corner radii optimized for standard end mills
- Non-critical tolerances relaxed from ±0.001" to ±0.005"
- Pocket depth reduced — eliminated need for long-reach tooling
- Part passed CMM inspection on first run
Free Reviews. Real Engineering. Production-Ready Parts.
Our DFM process is built to save you time and money before a single chip is cut.
Free DFM Reviews
No charge. No obligation. Every upload gets reviewed.
- Wall thickness & feature analysis
- Tolerance optimization suggestions
- Cost reduction recommendations
- Material selection guidance
Engineering Collaboration
Work directly with machinists who understand your part.
- Direct engineer-to-engineer feedback
- Fixturing & setup considerations
- Multi-axis machining guidance
- Surface finish recommendations
Production-Ready Designs
Your optimized design goes straight to the machine.
- Designs verified for machinability
- CMM inspection on every order
- Faster cycle times from optimized geometry
- Higher first-pass yield
Three Steps to a Better Design
Upload your file. We review and suggest. You approve and we machine.
Upload CAD
Send your STEP, IGES, DXF, or PDF file. Tell us your material, quantity, and any special requirements. We accept SolidWorks and STL files too.
We Review & Suggest
Our engineers check wall thickness, undercuts, tolerances, tool access, and cost drivers. You get a detailed DFM report with specific, actionable suggestions.
Approve & Machine
Make changes based on our feedback. Approve the optimized design and we machine your parts with confidence. CMM inspection included on every order.
DFM Questions Answered
DFM Design Support By City
Upload Your CAD File for a Free DFM Review
Get specific, actionable feedback on your design before machining begins. No charge. No obligation.
Free DFM review on every upload · 24-hour turnaround · STEP, IGES, DXF, PDF accepted · No minimums