for complex geometries
on milled features
available on prototypes
Seattle projects
CNC Machined Flight Control Components for Aerospace Teams
Flight control teams in Seattle need brackets and fittings that are lightweight, precise, and documented. We machine aluminum 7075, titanium, and 4340 steel flight control components to ±0.001". AS9100D-aligned docs on every order.
Right Alloys
Al 7075, titanium 6Al-4V, and 4340 steel with mill certs.
Hinge Precision
±0.0005" on critical hinge bores and pin holes.
AS9100D Docs
Inspection reports and traceability for flight control programs.
Where Commercial Aviation Begins
Seattle's aerospace ecosystem revolves around Boeing's Everett widebody assembly plant — the largest building in the world — producing 747, 767, 777, and 787 aircraft. Boeing's Renton facility builds the 737 MAX. Blue Origin develops orbital launch vehicles in nearby Kent, and hundreds of Tier 1 and Tier 2 suppliers machine aerostructures, engine components, and interior fittings across Puget Sound.
RivCut serves Puget Sound aerospace teams with AS9100D-aligned machining, instant quoting, and fixed lead times — flight-critical parts that clear Boeing receiving inspection the first time.
Boeing Commercial Airplanes
737 MAX (Renton) and widebody 787/777X (Everett) assembly
Blue Origin
Orbital launch vehicle development and manufacturing in Kent
Electroimpact
Automated aerospace assembly systems and tooling in Mukilteo
Janicki Industries
Large-scale aerospace tooling, composites, and structures in Sedro-Woolley
What Seattle Aerospace Teams Usually Order
| Typical quantity | 5–25 validation or low-rate initial production parts |
|---|---|
| Common materials | Aluminum 7075-T6, Titanium 6Al-4V, Stainless Steel 17-4 PH |
| Key requirement | Full AS9100-aligned documentation including material certs, FAIRs, and dimensional inspection reports on every order |
| Typical lead time | 10–20 business days depending on material and complexity |
| Who orders | Procurement engineer or supply chain manager at a Boeing Tier 1 or Tier 2 supplier, or a hardware engineer at Blue Origin or an Amazon Aerospace team |
Flight Control Parts for Seattle Teams
Aileron brackets, rudder hinges, flap tracks, and actuator arms machined to print.
Aileron & Elevator Brackets
Aluminum 7075 aileron and elevator hinge brackets. Precise bore and edge distance tolerances.
Al 7075-T6Rudder & Fin Hinges
Aluminum and titanium rudder hinge fittings with tight pin bore and bushing fits.
Ti & AlFlap Track Sections
Aluminum flap track sections with precise roller groove profiles and fastener patterns.
Roller groovesActuator Arms & Links
Titanium and steel actuator arms, push-pull rods, and bellcranks with precise clevis bores.
Ti & 4340Servo Mounts
Aluminum servo motor mounts and brackets for flight control actuators. Precise bolt patterns.
Al 6061Cable Quadrants
Aluminum cable quadrant drums and guide pulleys for primary flight control cables.
Cable systems8 Housings. 8 Days. Flight-Critical Precision.
A Puget Sound flight controls team needed actuator housings with precise bore fits for servo valves, O-ring grooves for hydraulic sealing, and anodize for corrosion resistance. Teams near companies like Boeing Commercial Airplanes trust this kind of precision and documentation rigor.
Every part shipped with complete documentation:
- CMM dimensional report — bore fits and O-ring grooves verified
- Material cert with heat lot and ASTM B209 compliance
- First Article Inspection per AS9102
- Hard anodize process cert with thickness verification
What Seattle Aerospace Buyers Should Know
Ensure your supplier is Boeing-approved or can obtain D1-4426 quality system approval
Puget Sound receiving docks reject unapproved source shipments.
Ask about titanium and CRES machining experience
Boeing 787 and 777X programs specify Ti-6Al-4V and corrosion-resistant steel extensively.
Request packaging per Boeing D6-54551 transportation and handling standards
damaged parts at receiving generate costly rejections and delays.
When Your Local Shop Can't Keep Up
When a prime surges volume, local shops push you back in the queue. We give you fixed lead times, instant quoting, and aerospace-grade documentation — every time. Seattle's aerospace sector demands it.
Documentation-Ready
Dimensional reports, material certs, and process records ship with every order — no chasing paperwork after delivery.
Full Material Traceability
Every bar ships with mill certs and heat lot numbers. Full chain of custody from raw stock to finished part.
CMM Inspection, Every Part
NIST-traceable CMM verification on every critical dimension before anything ships. No sampling — we inspect every part.
5–7 Day Prototype Turnaround
Most first articles ship in under a week. Rush available for simpler geometries. Confirmed ship date at order.
Need our full quality documentation? Email us — we'll send everything your team needs.
From File to Part in 3 Steps
Simple, clear, and designed for fast-moving teams.
Upload & Quote
Upload your STEP or IGES file, select material and finish, and get an instant AI price. Every quote includes a free DFM review.
We Machine & Inspect
Parts run on our CNC mills and lathes with CMM inspection on every order. We verify every critical dimension before shipping.
Ship with Full Docs
Your order ships with dimensional reports, material certs, and full paperwork — everything your quality team needs.
Questions from Seattle Aerospace Teams
Aerospace CNC Machining in Other Cities
We serve aerospace teams in cities across the US.
Upload Your CAD File
Flight Control Components, structural brackets, housings, and more — we machine them all. Most orders ship in 5 to 7 business days.
No minimums · 100% Made in USA · Never brokered · Ships anywhere in the US
Currently accepting new projects